Offset bearing 1" - 50/50 - PU = 25 pcs
Save as PDF
Product number: 21050050
This item cannot be ordered directly because it is not in stock or the shipping costs have to be determined individually. However, we will be happy to provide you with an offer for this.
Product information "Offset bearing 1" - 50/50 - PU = 25 pcs"
This offset bearing has been developed for suspended shading systems with gable end drive. It brings the drive shaft to an optimal position and as a support point enables its rotation. The product has been built to hold trailing load.
Material: High impact reistant plastic
For mounting you will need the following parts:
- M 8 x 70 bolt
- M8 nyloc nut
Einbauweise bei einer aufgehängten Schattierung
Kunden, die diesen Artikel gekauft haben, kauften auch:
Steel tube, galvanized 1"
PU: loose
This steel tube is used as a drive shaft in shading and ventilation systems in large greenhouses. Due to its wall thickness of 3.25 mm, it is very resistant against torsion. The tube connector halves within our product range are used to connect the tubes. Diameter: 33.5 mm Wall thickness: 3,25 mm Length: 6050 mm Material: Steel, galvanized
0,00 €*
Square tube, galv. 50 x 50 L=6,40 m
VPE:: 1
The square tube is used as a holder for some shading system components. Material: galvanized steel, 2 mm wall thickness
0,00 €*
Hexagon bolts M 8 x 70 galv. ISO 4014 - PU = 100 pcs
An all-purpose partially threaded steel screw with hexagon headMaterial: galvanized steel
0,00 €*